Header Ads

Tips for Cleaning a Hard Water Shower Filter Head

hard water shower filter

In this article, I will show you a number of tips that will surely help you cleaning a hard water shower filter head. To be honest, the process of cleaning a hard water shower filter head is not that difficult but what you need to do is to follow some steps. At the same time, you also need to keep one thing in your mind that if you don’t have time in your hand, then you will definitely not be able to clean it in a proper way. Therefore, you must need to take assistance from those who are actually expert at cleaning different types of hard water shower filter heads or you may also need to look for a company / agency that usually deal with this type of matter. However, you may need to spend a few bucks for this purpose but this way will help you to save your time. On the other side, if you plan to clean the head of your hard water shower filter, then you will be able to save your money but you have to give your effort. Anyway, below are the full and complete guide how to clean a shower head of your hard water shower filter.

Steps:

1. In order to clean the head of your hard water shower filter, the thing you need to do at first is to manage a plastic bag and then put white vinegar in there. Keep one thing in your mind that you ought to pour sufficiently to fully cover the hard water shower filter head when the bag is tied onto the shower. Besides, you also need to ensure one thing that the bag is completely free of holes as well as it has the great ability to support the vinegar weight for an extended time frame.

2. After successfully completing the first step, now the thing you have to is to pour several baking soda into that plastic bag where you also put white vinegar. You ought to pour in around 1/3 cup of baking soda for each cup of vinegar that is poured into the container or tub. For your kind information be informed that the solution must bubble.

3. Now it’s the most appropriate time to raise the plastic bag you managed up to the head of your hard water shower filter while it is still attached. The plastic bag must be hold open in the hands you have. Try raising the plastic bag up to the hard water shower filter head therefore, the head is fully submerged.

4. The top of the plastic bag should need to be tied off this time. In order to tie off the plastic bag, you can make use of the following things.

A Rubber Band.
A Zip Tie.
A Hair Elastic.

Besides, you also need to ensure one thing that you tie the bag such that you can let move without the bag falling.

5. Now you have to wait at least an hour. For a deeper clean, what you can actually do is to leave the vinegar bag overnight.

6. Lastly, remove the bag. Throw away the bag and the vinegar. Try running the shower for a couple of minutes, until or unless it doesn’t smell like vinegar. The shower ought to be cleaner as well as run more efficiently.


To sum up, the above mentioned steps can also be used for cleaning the hard water shower filter head. Just follow the steps again and again to successfully clean your shower head. That’s all for today and thanks for reading this article.

No comments

Powered by Blogger.